CYP12047

HDBaseT Lite Receiver

The PU-515PL-RX HDMI PoH Receiver allows uncompressed HDMI signals to be received via Cat5e/6/7 cable over distances of up to 60 metres

HDCP 2.2 Compliant
HDMI 1.4 with 3D, 4K×2K support, HDCP and DVI compliant
Supports HDMI 1.4 (including HDCP) over a single CAT5e/6/7 up to 60m
Complies with HDBaseT- Lite specifications
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output displays EDID settings
HDMI input up to 15m with 8-bit deep colour, or 10m with 12-bit deep colour
Supports HDMI output up to 15m with 8/12-bit deep colour
Supports two-way IR, RS-232 Control, and Power Over HDBaseT (PoH)
Supports High Definition LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission

Features

HDCP 2.2 Compliant

HDMI 1.4 with 3D, 4K×2K support, HDCP and DVI compliant

Supports HDMI 1.4 (including HDCP) over a single CAT5e/6/7 up to 60m

Complies with HDBaseT- Lite specifications

Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output displays EDID settings

HDMI input up to 15m with 8-bit deep colour, or 10m with 12-bit deep colour

Supports HDMI output up to 15m with 8/12-bit deep colour

Supports two-way IR, RS-232 Control, and Power Over HDBaseT (PoH)

Supports High Definition LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission

Product Description

The PU-515PL-RX HDMI Receiver allows uncompressed HDMI signals to be sent via Cat5e/6/7 cable (up to 60m). RS-232, PoH (Power-over-HDBaseT) and IR control.

PLEASE NOTE – The PU-515PL-RX Receiver must be used with the PU-515PL-TX Transmitter.

CYP PU-515PL-TX and PU-515PL-RX:
The CYP PU-515PL Kit containing both the Transmitter (PU-515PL-TX) and the Receiver (PU-515PL-RX), is a HDBaseT LITE extender kit which will transmit uncompressed HDMI, RS-232, 2-way IR control and PoH (Power-over-HDBaseT) over single Cat5e/6/7 cable. All signals are transmitted consecutively over standard Ethernet cables over distances of up to 60 metres.

The Transmitter and Receiver units convert the HDMI, control and PoH signals for transmission over Cat-X cable – often readily available in a building’s existing cable infrastructure. Therefore, AV installation signal transmission over distance can be provided with reduced time, disruption and cost to the installer and the end user.

This HDMI / HDBaseT LITE extender kit also supports both 3D signals (up 60 metre transmission) and 4k 2k (over 40 metre transmission).

CASE STUDY:
Southbank Bar, Nottingham: 4K UHD AV Distribution System

Specification