CIE-Group Atlas Sound IP Two Zone Controller, Line Out, PoE ZC2-CK

Use with ControlKom software, POE networks & IP Telephones to create extremely versatile paging and messaging systems
Balanced line output to drive Atlas CP, Pa or AA series amplifiers
Modular 1RU design allows for easy rack mounting and cable access
Systems available with single (IPS-ZC1) or dual module (IPS-ZC2) configurations

List Price

£1,102.50

$1,708.88

€1,323.00

excl. VAT

Description	ZC2-CK
Analog Output	Transformer balanced, 3-Pole Terminal Block
Output Trim Range (Software Controlled)	+16 to -30 (Plus Mute), ½dB steps, gain above unity is digital, attenuation below unity is analog
Impedance	600 ohm, Each leg to ground
Maximum Level	+23 (+24 Unloaded) dBu @ 1kHz, 2k ohm load
Frequency Response	20Hz to 20kHz ± 1dB
Dynamic Range	105dB min, A-Weighted
IM Distortion (SMPTE)	Less than 0.01% 60Hz/7kHz, 4:1, +4dBu
Crosstalk	100dB typ. 1kHz bandpass
Audio Convertors	24 bit
Audio Processing	24 bit and higher
Propagation Delay	1.58ms min
Ethernet	10Base-T, 10 Mb/sec, RJ-45 connector
Max Cable Length	328ft / 100 meters, Standard Ethernet Cat 5 Cable Length Limits
Power Requirements	12 ~ 18vDC, IEEE 802.3AF compliant POE switches or local 12 ~ 18vDC PSU
Max Current Draw	800mA
Construction	18 guage CRS
Size	483(W) x 44(H) x 209(D) mm, 1RU High with one or two modules installed
Weight (Net)	1.70kg
Weight (Gross)	2.10kg

Product Description

Providing the same function and control of the standard Atlas Sound ControlKom IP-Addressable devices, the ZC2-CK interfaces to conventional high impedance amplification systems at line level, thus allowing IP control and messages to be broadcast over mass / multiple loudspeaker networks.

For larger applications where installation of multiple IP Loudspeakers is both impractical or cost prohibitive.

Ideal for warehouse, large zone, site wide distribution applications.