CIE-Group Inter-M 8 x 8 Audio Matrix PX8000

8 IN - 8 OUT Matrix Unit
Simple and easy to use - clear LED indications, illuminated buttons and fader-type volume controls
BGM input level LED/output level meter (LEDs)
Remote control per zone via LM8000 (selectable via front panel)
Paging via remote MIC (up to 4 units) or via front panel zone control panel
Auto address allocation for RM8000/LM8000 on connection
Monitor Loudspeaker - for monitoring the selected audio input source
Emergency Message - in-built Digital Message Store allowing recording and broadcast of an emergency message, activated by dry contact closure per zone (if no emergency message is recorded, this facility can be used as an Emergency Mute).
Multiple Units are linkable via D-sub 25pin

List Price

£737.00

$1,142.35

€884.40

excl. VAT

Description	PX8000
Paging Mic	50dB (Balanced)
BGM Audio Input	8 x -10dB (Unbalanced)
Audio Output	0dB (Balanced)
Sampling Frequency	8kHz
Recording Duration	30 seconds
Tone Control (Paging Mic)	±10dB @ 10Hz/10kHz
Tone Control (Audio Output)	±12dB @ 100Hz/10kHz
Total Harmonic Distortion	Less than 0.03% (20kHz LPF)
Signal to Noise Ratio	Greater than 75dB (20kHz LPF)
Power Source	230v AC
Dimensions	482(W) x 132(H) x 380(D) mm
Weight (Net)	8.50kg
Weight (Gross)	10.67kg

Product Description

The Inter-M PX8000 is an 8x8 Audio Matrix System which provides a flexible, versatile, simple to operate multi-zone audio distribution system for applications such as hotels, leisure complexes, retail outlets and multi-room public address / background music or audio visual installations.

Designed to 'un-complicate' a multi-zone, multiple input audio system, the InterM PX8000 Matrix is a fully configurable controller routing up to 8 audio sources (voice, background music, tones and recordings, etc) to any of eight destination zones.

Each signal input on the PX8000 features its own level and tone control on the rear of the unit (to avoid 'tampering hands'!); whereas each output zone is controlled by a simple slide fader. Above the fader is a selector switch to easily choose the audio input source for each zone.

The System also features 4 x RJ45 sockets to connect up to 4 optional RM8000 Remote Microphone Consoles, plus an additional 8 x RJ45 sockets for inclusion of up to 8 optional LM8000 Remote Wall-mount Controls.

The InterM RM8000 Remote Microphone Station is an impressive desktop microphone/controller, allowing broadcast to any of the Matrix's 8 zones.
The InterM LM8000 Remote Control Wallplate provides a whole lot more than just remote volume control at the end of the line! It also provides audio source selection from any one of the 8 sources connected to the PX8000, plus 2.5mm line input socket and 1/4" jack microphone input - both with their own volume level control.

With zone control connectivity over standard Cat5e/6 ethernet cable and a huge range of input/output configurations easily produced, the PX8000 is an ideal, uncomplicated multi-zone audio controller.